TPMS Tire pressure display for Toyota and Lexus vehiclesDirect installation on Factory no need to cut wires
Displays the pressure of each tire separately
Displays the results on the car dashboard
The device is installed on the agency's valves and does not require tuning, calibration, or connection
It is very easy to install and does not require a specialized technician; you can install it yourself.
It is installed on the following Toyota and Lexus TPMS vehicles
Toyota Avalon 2019 - 2022
Toyota Camry 2018 - 2024
Toyota RAV4 2019 - 2023
Toyota Corolla 2020 - 2024
Lexus IS NX NX200t NX300h Series 2016 - 2022
Lexus GS350 2014 - 2021
The manual tire reset method is applied in the following order:
1 - Inflate the tire to 300, then disconnect it from the tire.
2 - Set all tires to 35 PSI, which is 240 KPA on the tire pressure gauge.
3 - Reset the pressure from the gauge.
4 - Wait for all readings to appear and the bars to disappear.
5 - Come to the front left tire and inflate it until it reaches 110 anywhere on the screen. The most important thing is that you see 110 with your own eyes and that the location is actually the front left.
6 - Then adjust the right front tire to 150 and do the same thing. The most important thing is your actual position because you currently need the screen to see the number.
7- Adjust the rear left tire until it reaches 190 anywhere on the screen.
8- Move the right rear wheel until it reaches 230 in any position on the screen.
Here, the positions will automatically change with you, and each wheel will go to its position. If it does not change, just turn the car and start it, and it will change with you. **The order is important. If you make a mistake, the process will be ruined, and you will need to start over from the beginning.**
- Inflate them to 35 in the same order: front left, then front right, then rear right, then rear left, without resetting the gauge.
Manufacturer: Republic of China High quality